PLANET Internet Camera Firmware Release
============================
Product support: ICA-4130S 
Release Date:    10/2/2014
Release Version: 11.5.0.86
Previous Release: 11.4.12.73

Added
- Supports ONVIF profile S.
- Supports MPEG4 and MJPEG format.

Note: The camera is compliant with PLANET NVR & CV3 sotware via ONVIF profile S. 
However, the event trigger (e.g., motion detection) function in NVR & CV3 is not supported.   

-----------------------------
Firmware Release Version: 11.4.12.73
Release Date: 2014/05/06


Initial release
-----------------------------

Firmware Upgrade Procedure:
========================
Step 1. Reboot the camera from Web UI or disconnect the power manually.
Step 2. Restore factory default setting via Web UI.
Step 3. Go to the Web UI of IP Camera, Configuration->Maintenance->Upgrade Firmware.
Step 4. Browse and select files for the upgrade.
Step 5. Click the "Upgrade" button then wait about 1-3 minutes. The upgrade is complete after the system reboots successfully.

Note: For the new version, you need to re-install the Active X. During the installation period, please close the browser, otherwise the Active X may not be installed correctly.

**** Note ****
1. Do not power off during the upgrade process. This will damage the unit.
2. After upgraded, please restart machin with a cold reboot for firmware reload properly.


Thanks for choosing PLANET products, any comment or feedback will be appreciated.


Best Regards,

PLANET Tech Support Team

Technical support: support@planet.com.tw